歡迎光臨 紫楓粉絲頁

1






























































































































Test steps
Step: 1. Idle Screen->Main Menu->Tools->"Alarm clock"
2. No alarm exists
3. Select Alarm 1/2/3/4/5 (Multiple alarm)
Step: 1. Idle Screen->Main Menu->Tools->"Alarm clock" 
2. Select "New" (When no alarm exists)
3. Select "Options"->"New Alarm"(Exist one or more alarm)
[Precondition] Exists one or more alarms

Step:
1. Idle Screen->Main Menu->Tools->"Alarm clock"
2. Select "Options"
[Precondition] Exists alarm A and alarm B, alarm A status is on and alarm B status is off Step:
1. Idle Screen->Main Menu->Tools->"Alarm clock"
a)select alarm A
b)press "Options"->Off
2.Idle Screen->Main Menu->Tools->"Alarm clock"
a)select alarm B
b)press "Options"->On
[Precondition] Exists one or more alarms
Step:
1. Idle Screen->Main Menu->Tools->"Alarm clock" ->"Options"->Delete
[Precondition] Exists one or more alarms
Step:
1. Idle Screen->Main Menu->Tools->"Alarm clock" ->"Options"->Delete All
[Precondition]  Idle Screen->Main Menu->Tools->"Alarm clock"->"Options"->"New Alarm"
Step: 'Highlight the "Alarm Status"
1. Press Right/Left navigation key
2. Select "OFF"
3. Select "Set Time"
4. Setect 15 Minutes Later,30 Minutes Later,45 Minutes Later,1 hour Later
[Precondition] Alarm status set to ON Step: Highlight the "Alarm Repeat" select following option
a) Once
b) Daily
c) Mon to Fri
d) Sat to Sun
e) Except holiday
[Precondition] Alarm status set to ON Step:
1. Highlight the "Alarm Tone"
2. Select "List"
Step:
1. Highlight the "Memo"
2. Enter maximum characters in all Input modes

Note:
1) This test case should be executed for all available languages
Step: 1. Set the all Alarm Status OFF and Save
2. Go to Idle screen
[Precondition] Set the alarm with all valid entries
Step: 1. Select "Save"
[Precondition] Set the alarm with all valid entries
Step: 1. Let the alarm invoke
[Precondition] Set the alarm with all valid entries Step:
1. Let the alarm invoke
2. Select "Snooze" option
[Precondition] Set the alarm with all valid entries
Step:
1. Let the alarm invoke
2. Select "Off" option
[Precondition] Set the alarm with all valid entries

Step:
1. Let the alarm invoke
2. Do not select "Off" or "Snooze"
[Precondition] Set the alarm with all valid entries Step:
1. Let the alarm invoke
2. Select "Snooze" maximum times.[Approximetly 12 times]
[Precondition] Alarm status set to ON Alarm time set with time AM Alarm repeat set to Once Default alarm Tone set Save Step:
1. Idle Screen->Main Menu->Tools->"Alarm clock"
a) Edit the alarm time from AM to PM
b) Edit Alarm repeat from Once to Daily / Mon to Fri / Sat to Sun / Except holiday
c) Edit Alarm Tone from Default
d) Save
Step: While editing Alarm Time/Repeat/Tone/Subject
a) Receive MT Call
b) Receive SMS
c) Receive Alarm/scheduler alert
[Precondition] '(Execute if multiple alarms are available) 1. Alarm1 is set for 12:01
2. Set Alarm2 for the same time as set for Alarm1

Step:
1. Let the alarm invoke
[Precondition] (Execute if multiple alarms are available) Alarm1 is set for on time

Step:
1. Reopen the Alarm1 and edit time for some different time
2. Select "save"
[Precondition]
a) Alarm1 is set time 12:02 & Alarm2 is set time 12:01

Step:
1. Let the alarm invoke
[Precondition] 
a) Alarm1 is set time 12:02, memo "A",ring tone Alert.mid
a) Alarm2 is set time 12:03, memo "B",ring tone Bells.mid
a) Alarm3 is set time 12:04, memo "C",ring tone Clouds.mp3

Step:
1.Let the alarm invoke
[Precondition] Set the alarm Once and time 11AM

Step:
Change the handset time to (Current handset time is 10:30AM)
1) Future Time (Ex: 11:30AM)
2) Past Time (Ex: 10AM) Note: This TC has to be executed for 24hr format also.
[Precondition] Set the alarm
a) Mon to Fri
b) Sat to Sun
 
Step: Change the handset Date as below days should match
a) Sat or Sun
b) Mon
Note: This TC has to be executed for 12hr and 24hr format.
[Precondition]
a) Set the alarm with all valid entries
b) Set SIM PIN ON

Step:
1. Power cycle, Stop in screen input SIM PIN
2. Let the alarm invoke
[Precondition] Set the alarm with all valid entries

Step:
1. Go back to Idle
2. Let the alarm invoke. Do'nt press any Key
3. After 1 mins
4. After 5 mins
[Precondition] an alarm 1 invoke at time 12:00
Step:
1. Receive SMS
2. Receive Alarm 2 at time 12:01
3. Receive reminder of schedule at time 12:01
[Precondition] a) Set the ring type to vibrate
b) Set the alarm on time

Step:
1. Let the alarm invoke
2. Get a MT call on alarm screen
[Interrupt(CC)-1] [Precondition]
a) Set the ring type to vibrate
 b) Set the alarm on time

Step:
1. Let the alarm invoke
2. Get a MT call on alarm screen
a) accept the MT call
b) reject the MT call
a) 2nd party hang up the call
[Interrupt(CC)-2] [Precondition]
1. Set a alarm memo with "A"

Step:
1.The time of alarm "A" is up;
2.Make a phone call to handset.
3.Accept the incoming call
4.2nd party terminate call
[Interrupt(CC)-3] [Precondition]
1. Set an alarm with memo "A" 
Step: 
1.Make a phone call to handset.
2.When incomming call, the time of alarm "A" is up;
3.Accept the incomming call
4.2nd party terminate call
[Interrupt(CC)-4] [Precondition]
1. Set an alarm with memo "A" 

Step: 
1.Make a phone call to handset.
2.Accept the incomming call,
3.the time of alarm "A" is up;
4.2nd party terminate call
[Interrupt(CC)-5] [Precondition]
1. Set an alarm with memo "A" Action: 1.Make a phone call to handset.
2.When incomming call, the time of alarm "A" is up;
3.Accept the incomming call, immedately disconnect call (before 3 seconds)
[Interrupt(CC)-6] [Precondition]
1. Set an alarm with memo "A"

Step: 
1. Make a phone call to handset.
2. When incomming call, the time of alarm "A" is up;
3. Disconnect call
[Interrupt(CC)-7] [Precondition]
1. Set an alarm with memo "A"

Step:
1. Make a phone call to handset.
2. When incomming call, the time of alarm "A" is up;
3. 2nd party terminate call
[Interrupt(CC)-8] [Precondition]
1. Set an alarm with memo "A"

Step:
1. Make a phone call to handset, accept the incoming call.
2. The time of alarm "A" is up;
3. Press "off" for alarm "A"
 

Related Posts:

  • 如何作市場分析一般而言,SWOT大家都懂,但其背後的意涵其實是OT為總體環境分析SW為個體環境分析所謂總體環境,便是:政治環境、經濟環境、社會環境、科技環境等等如果學過經濟學的人可以考慮成總經部分而從這些環境的分析下可以發現,我們的產品在總體環境存在著什麼樣的機會,可以大賣。以及存在著什麼潛在的威脅個體環境便是我們自己公司與自己產品等等的分析,而公司牽扯到組織與供應商與競爭者和顧客,我們在取得這些相關資料後,跟我們的產品作分析,即可發現我們產品的優勢劣勢所以我… Read More
  • 從巨匠的發展看全球IT產業人才培訓 主講人 鍾梁權 先生   主題 從巨匠的發展看全球IT產業人才培訓   時間 96年4月18日(星期三) 13:00~14:50   摘要 IT這一塊,無論是每個領域,市場都是很大的。 全球資訊人才培訓的方法不斷的演進,從傳統教室到非同步教學到同步及時學習到工作中學習。 考認證不只學生要繳費給軟體廠,補教業… Read More
  • 十年--最近想寫的故事約40分鐘的劇本。主架構是以我同學為背景他這個人蠻有趣的,做過一些熱血至極的事情。--------------------------沒有什麼超乎常理的故事,一切的一切,都只是你我身邊會發生的事情而已,但是,因為人有所不同,所做出來的結局也有所不同。--------------------------人物設計:主角:近年流行的弱氣男社長:熱血笨蛋女主角:目前沒想到戲份,但一個故事沒女主角也很怪,怕會沒賣點。--------------------… Read More
  • 完美人生的藝術 主講人 熊競平 先生   主題 完美人生的藝術   時間 96年4月25日(星期三) 13:00~14:50   摘要 完美人生的最佳定義為,健康、幸福、成功。 要尋求或創造相對的成就,意思便是不要想太多,不要亂比較,只要找到自己相對於自己所有的成就,就可以每天快快樂樂的過日子了。 好人不能做壞事,但壞人有… Read More
  • 面試不要開玩笑作者: SKBOY (木板男孩) 看板: StupidClown我朋友真的在面試鬧過.....我忘記他去哪個大學面試了~~就推甄的第二階段面試面試官除了問些一定會問到的"為什麼會想來唸這個"..之類的之外因為它是有點藝能的科系,所以面試官有叫面試生做才藝表演我朋友沒料到這個,發現別人拉小提琴啦幹麻的都好屌他就囧在那邊一下下(什麼都沒準備)然後他腦袋我不知道怎麼回事,突然出現一個Idea當面試官要他才藝表演的時候:面試官:請你表… Read More

0 意見: